![]() The intercom was iffy, but it worked better once the volume was set in the camera OS. I was locked out during the initial video setup, likely from failed password attempts, but my phone worked using onvifier and the defaults.Īudio and motion events work in blue iris without much setup, Also, if it just fails, close and reopen blue iris. The Swan 885 profile works and the insert, also works as-is, except that it has a different login and password than the website uses. Once RTSP works, you can probably set up a second user, and switch away from the anonymous access, but it did not seem to work. Once you have the RTSP stream, it's ip:port/ch01/0 This binding allows you to use most IP cameras in openHAB and has many hidden features, so please take the time to read through this. Click ‘Entity’ and find your new CCTV cameras in the list, and select one. Once you can access the camera website, you can change the network settings to DHCP, and enable RTSP with anonymous access. restart HA (click the check config button first to ensure no mistakes) to add them to your dashboard, click the ‘edit dashboard’ button, then the + button. Or, you can use the discovery tool which automates this process If you can ping the camera, you can get the MAC address from ARP. I will write a Swann NVR / IP camera compatibility guide in the future. Network video recorders (NVRs) will not be covered in this guide. You can see what BNC video inputs looks like on the back of a DVR in the above image. Placing the camera on the network or on a laptop, via poe injector, you can set up the camera using a 172.16.1.1 address on the private subnet. This guide is for Swann DVRs that use hard wired security cameras via coax cable and BNC connectors. Without that, the IP is hard coded to the 172.16.x.x subnet, and the default admin password is the MAC address of the network device. Plus, the Swann network discovery app did not work for me. I have cable internet connection,connected to wireless router 192.168.1.1 and ip address for cam is 192.168.1.5 i can view the cam from pc but cant view it form other location. I don't know how to change that, and the Swann website is not forthcoming. I have swann max ip cam,i tried to viwe the cam romotely but i couldnt, I went through the manual step by step but still not working. The camera OS website has an area to add and edit the admin account, but it was not a default password, or the defacto 12 digit MAC address, minus the : separators. I don't seem to be able to get ONVIF working, but it will apparently work, from the IPCT thread where people have figured it out. Which is supposedly needed to update and change one of the default admin passwords.Īnd, from the NVR, you can add another user to the camera OS which will provide you with the ONVIF access. I haven't been able to find the ONVIF info, but apparently if you plug the camera into the Swann NVR first,
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |